<tbody id="2qiil"></tbody>
  1. <bdo id="2qiil"></bdo>
  2. <track id="2qiil"><div id="2qiil"></div></track>

    <track id="2qiil"></track>

    News

    Subscribe to RSS Feed

    • VORTEC?Beast - larger engine
      VORTEC?Beast - larger engine

      Posted: 3/23/2019
      How to make the VORTEC?Beast better -- comes standard with HONDA's largest engine.
      Read More »
    • VORTEC CANNON - More Power ~ More Value
      Posted: 9/23/2018
      Intec's VORTEC CANNON provides many customer benefits & high value for quick insulation removal or HVAC cleaning. Now with an 18hp Vanguard V-Twin motor for higher power, additional customer benefits include:

      -large impeller with abrasive resistant steel for long lasting high production
      - inlet air filter to allow for optimal cooling
      - shroud curvature made out of abrasive resistant steel for long lasting operation
      - oversized muffler for quiet operation
      - tachometer to schedule preventative maintenance
      - highly portable with CANNON MOUNT technology for added stability
      -inlet and outlet safety flaps standard.

      The VORTEC CANNON is compact, yet its production is equivalent to competitors' large vacuums.
      Read More »
    • Intec enhances Insulation Removal Vacuum Bag offering
      Intec enhances Insulation Removal Vacuum Bag offering

      Posted: 3/4/2018
      Intec has expanded our popular, high-value vacuum bag offering to include ... VORTEC Better vacBAGS
      Read More »
    • Intec offers value pricing for Certified Pre-Owned models
      Intec offers value pricing for Certified Pre-Owned models

      Posted: 12/24/2017
      Intec is offering end of year value pricing on certified pre-owned blowing machines, VORTEC Beast vacuum, and 12,500 Gen-Pro industrial generator.
      Read More »
    • Intec commercializes two new large truck / trailer mount blowing machines
      Intec commercializes two new large truck / trailer mount blowing machines

      Intec's FORCE?5150 & 5650 insulation blowing machines


      Posted: 11/26/2017
      Intec commercializes two new, high value, truck / trailer mount insulation blowing machines.
      * FORCE 5150 - POWERED by HONDA, this smaller unit is crazy quiet...and crazy fast. Production rates of 1,000 lbs per hour fiberglass and 2,000 lbs per hour cellulose.
      * FORCE 5650 - POWERED by HONDA, this high volume production unit is Intec's largest with production rates of 2,000 lbs per hour fiberglass and 5,500 lbs per hour cellulose.
      Read More »
    • Intec's portable Fluid Delivery Systems simplify wall-spray applications
      Posted: 11/19/2017
      Intec's family of Fluid Delivery Systems offer:
      1. PORTABILITY
      - Built in handle
      - Lightweight at only 40 pounds
      - Pressure gauge, valve, quick connections, and recirculation line are all in one compact package.

      2. HIGH PRODUCTIVITY
      - Self priming up to 12 feet.
      - Up to 350psi, or 1,200psi ? your choice.

      3. LONG LASTING
      - Direct Drive means virtually no maintenance.
      - High quality components.
      Read More »
    • Intec Platinum Vacuum Bags
      Intec Platinum Vacuum Bags

      Platinum Vacuum Bags


      Posted: 11/19/2017
      Intec's Platinum Vacuum Bags offer a number of benefits:
      1. TWICE AS THICK AS INDUSTRY AVERAGE means that they:
      * are virtually tear resistant
      * can be moved around as you desire?even with a forklift
      * act as a filter to keep dust inside the bag for a cleaner work environment

      2. LARGE ~75 cubic feet to hold a lot of product

      3. LOW PRICE -- Quantity discounts for as few as 20 bags.

      Read More »
    • Intec receives trademark status for FORCE?brand
      Posted: 9/9/2017
      Denver CO: Intec receives registered trademark status for our FORCE?Blowing Machine brand.
      "Obtaining registered trademark status for our FORCE brand is another step in creating value for Intec & our customers. At Intec, we continue to build our brand recognition to a leadership postion. The US Patent & Trademark Office recognition of FORCE further increases the value of Intec's popular blowing machines." Ray Lavallee, Intec's President.
    • Intec receives trademark status for VORTEC high-powered vacuums
      Posted: 5/31/2017
      Read More »
    • FORCE 5280 Application Certifications continue
      FORCE 5280 Application Certifications continue

      FORCE 5280


      Posted: 5/20/2017
      FORCE 5280 Application Certifications include:
      - BIBS (Blow In Blanket System)
      - JetSpray Thermal...Knauf's fiberglass spray-in system.
      - JM SPIDER PLUS...Johns Manville's fiberglass spray-in system
    • Intec releases the more powerful VORTEC VOLT 110
      Intec releases the more powerful VORTEC VOLT 110

      VORTEC VOLT 110


      Posted: 4/8/2017
      Intec releases the more powerful VORTEC VOLT 110...which sips energy using only a 110V - 20amp circuit.

      Using our 40 years of electrical motor knowledge, & know-how to obtain maximum power with little electrical input, Intec created the VORTEC VOLT 110.

      So how much vacuum power does it provide? Trial customers shared that the vacuum is more powerful than the large gas unit rented at a popular nationwide rental chain.

      Many uses:
      * insulation removal of cellulose, fiberglass, & scarfed foam.
      * insulation recycling
      * lawn & garden leaf pick-up & gutter cleaning.
      * restoration / water damage work.

      INDUSTRIES - RENTAL, RETAIL, CONTRACTOR

      Read More »
    • VORTEC Beast -- the Best get Better
      VORTEC Beast -- the Best get Better

      VORTEC Beast right side view


      Posted: 3/1/2017
      Intec has furthered the value our VORTEC Beast provides customers by incorporating enhancements including Abrasive Resistant Steel for a longer lasting shroud, exclusive anti-tip bar has been strengthened to now allow for lifting the unit from this bar, handle size increased & frame mount strengthened to allow for another lift point, inlet air filter created and installed on HONDA to simplify your maintenance, and we have created longer lasting impellers.
      Read More »
    • $200 Sales Incentive for Intec's VORTEC CANNON thru Mar 6, 2017
      $200 Sales Incentive for Intec's VORTEC CANNON thru Mar 6, 2017

      VORTEC CANNON


      Posted: 2/25/2017
      $200 Sales Incentive for Intec's VORTEC CANNON for purchases thru Mar 6, 2017.
      Read More »
    • Intec adds LRT Wireless to FORCE 5280
      Intec adds LRT Wireless to FORCE 5280

      FORCE 5280 dimensions


      Posted: 2/19/2017
      Intec adds its popular Long Range Transmission (LRT) GOWIRELESS remote to its FORCE 5280 HONDA powered insulation blowing machine.
      Read More »
    • Intec becomes Corporate Member of New York State Weatherization Directors Associ
      Posted: 12/20/2016
      Intec becomes Corporate Member of New York State Weatherization Directors Association (NYSWDA)

      "Intec is excited to become a NYSWDA Corporate member. We have worked with Matt Redmond and the NYSWDA team since 2008 to determine how best to assist NYSWDA's members. By taking our NYSWDA relationship to an increased level of partnership thru the Corporate Membership, Intec looks forward to increasing the value we provide NYSWDA, as well as its members, trainees and other associated contacts."
      Ray Lavallee, President, Intec.

      INTEC
      Since 1977, both professional contractors and do-it-yourself equipment users have looked to Intec as the industry leader in the design and manufacture of innovative, portable, professional-grade high output insulation blowing equipment. We constantly review what our customers need, and combine this information with our R&D to enhance our product line.

      The right system for your needs
      From our popular FORCE branded blowing machines, to our VORTEC extraction vacuums, Intec strives to provide our customers with the best combination of portability, functionality, and installation versatility to surpass their desired success. All of Intec's durable systems and accessories are made to minimize your down time and maximize your profit generating potential while providing exceptionally high returns on your investment.

      NYSWDA
      Since its inception in 1985, New York State Weatherization Directors Association (NYSWDA) has made it a priority to be the 'go-to' resource for information, technical training, and best practices in the home performance industry.

      NYSWDA is the leading provider of building sciences training in New York and many New England states. Our facilities, in Syracuse, Buffalo, and Troy, NY, are designed to integrate classroom training and laboratory exercises providing field technicians an exceptional learning experience. Our trainers are subject matter experts with years of field and classroom experience.

      CONTACT INFORMATION
      INTEC
      Jason Brown
      Phone: 303-833-6644 ext: 105
      Email: jasonb@inteccorp.com
      www.ixliang.com

      NYSWDA
      Drew Ehrlich
      Phone: 518-690-0494 ext: 25
      Email: dehrlich@nyswda.org
      http://www.nyswda.org/

    Archive



    和50岁的女发了关系过程
      <tbody id="2qiil"></tbody>
    1. <bdo id="2qiil"></bdo>
    2. <track id="2qiil"><div id="2qiil"></div></track>

      <track id="2qiil"></track>